We use cookies to improve your experience. By continuing to browse this site, you agree to our use of cookies. Additional Information.
IntroductionSpecification Comparison Material Manufacturing Dimensional Tolerances Wall Thickness Outer Diameter Surface Finishing Weld Bead Heat Treatment 机械性能 Non-Destructive TestingWhich Specification
This article provides an alternative code for Australian food services. These specifications include:
ASTM A269 “Specification for General Purpose Seamless and Welded Austenitic Stainless Steel Tubing”
ASTM A249 “Specification for Austenitic Boiler, Superheater, Heat Exchanger, and Condenser Welded Tubes”
AS1528 was revised in 2001 by key stakeholders in the Australian food and pipe industry. AS 1528 is unique in that it covers all relevant fittings except pipes.
All specifications refer to common steel grades such as 304, 304L, 316 and 316L. AS1528.1 applies to all duplex and austenitic stainless steel grades listed in ASTM A240.
All sizes require fusion-welded products without filler metal. Specifications such as ASTM A270, ASTM A269 and AS 1528 also apply to seamless products.
AS 1528 specifies a nominal thickness of 1.6 mm for all outside diameters (OD) except 2 mm for 203.2 mm outside diameter; other thicknesses may be specified by the purchaser. Standard tolerance + zero, -0.10 mm. The full negative tolerance implies the common practice of producing pipes of all sizes closer to the lower limit of the tolerance range. A typical range is 1.52 to 1.58 mm. This tolerance also applies to fittings.
* Tolerances for ASTM A554 weld removal conditions. * AS1528 also applies to OD sizes 12.7, 19.0, 31.8, 127.0, 152.4 and 203.2 mm.
All of these pipe specifications specify limits on wall thickness and outside diameter. The inner diameter is not specified separately.
Surface treatment specifications of various sizes recommended for use in the Australian food industry are as follows:
The processing of products used in the food industry requires pipes without weld residues on the inner surface.
The mechanical properties of various grades of stainless steel commonly used in the food industry are as follows:
In this interview, AZoM talks with Evident’s Ted Shields about the new Vanta™ GX XRF analyzer. Shields explains the Vanta GX system benefits and applications.
In this interview, AZoM talks with Bo Preston, Founder of Rainscreen Consulting, about STRONGIRT, the ideal Continuous Insulation (CI) Cladding Support System and its applications.
AZoM spoke with Dr. Shenlong Zhao and Dr. Bingwei Zhang about their new research aimed at making high-performance sodium-sulfur batteries at room temperature as an alternative to lithium-ion batteries.
Orton’s rotating axis viscometers were developed to measure the viscosity of molten glass at various temperatures.
Prometheus by Admesy is a colorimeter ideal for all types of spot measurements on displays.
The global semiconductor market has entered an exciting period. The demand for chip technology has both spurred and hindered the development of the industry, and the current shortage of chips is expected to continue for some time. Current trends are likely to shape the future of the industry as this continues
The main difference between graphene-based batteries and solid-state batteries is the composition of either electrode. Although cathodes are often modified, allotropes of carbon can also be used to make anodes.
In recent years, the Internet of Things has been rapidly implemented in almost all areas, but it is especially important in the electric vehicle industry.
Post time: Jan-17-2023